Your cart is empty

Vanquish Wraith Panhard Kit, Black


The panhard comes complete as shown with new link and all hardware needed.
If using this kit the Vanquish wraith chassis servo mount is required also. ***HERE***
You can run the chassis mounted servo with out the pan hard kit. If you run this way you would keep your links stock with all 4 links still attached. 
If you run CMS and the panhard, it requres you remove one of the two upper links to make it a 3 link setup. If you run 4 links and the Panhard there will be binding in the suspension.
A new drag link with traxxas ball ends or VP drag link is required to replace the stock drag link. ***HERE***
The panhard axle mount has two mounting holes, so you can set this up with either stock knuckles or VP high steer knuckles.

Add to Cart:

  • Model: vps03250
  • Shipping Weight: 0.3lbs
  • Manufactured by: Vanquish Products