Your cart is empty

Ax90022 Axial SCX10 Trail Honcho 1/10th Scale Electric 4WD - RTR



Ax90022 Axial SCX10 Trail Honcho 1/10th Scale Electric 4WD - RTR



This is the 1/10 scale, radio controlled, electric powered, ready to run
     SCX10 Rock Crawler Truck with the Trail Honcho Body from Axial Racing.

FEATURES: Chassis: Rigid steel C-channel, tapered for increased articulation and added realism Drive: Four wheel shaft drive with sintered diff locker, slipper clutch and WB8 Wild Boar driveshafts Radio: AX-3 2.4GHz pistol grip with digital high-torque metal gear steering servo ESC: AE-2 Forward/Reverse ESC with drag brake Motor: 27T 540 size Shocks: Oil filled, with dual rate springs and oil reservoir LED Lights: Two white for front and two red for rear Tires: 1.9" (48mm) Ripsaw Wheels: Walker Evans Racing wheels, black and chrome in color with 12mm hex Rear Suspension: Four link design optimized to reduce axle steer and torque twist Bumper: Front, tube style plastic with aluminum skid plate Body: Trail Honcho Body with plastic molded roll cage and lexan formed flat bed with diamond pattern and fuel cell details Ball Bearings: Full set enclosed Spur Gear: Plastic 48 pitch, 87 tooth Pinion Gear: Steel 48 pitch, 14 tooth

INCLUDES: SCX10 Rock Crawler Truck from Axial Racing with tires, wheels, radio motor, ESC, 2 head and 2 LED tail lights with controller, foam inserts, grease, decals, instruction manual and beadlock rings

REQUIRES: AA Batteries: Eight for transmitter Battery: 7.2V 6-cell stick configuration Battery Charger: To match selected battery Building and Track Equipment

SPECS: Vehicle; Length: 19" (483mm) Width: 9" (227mm) Height: 5.4" (137mm) Wheelbase: 12.3" (313mm) Ground Clearance: 2.7" (68mm) Weight: 4.0lbs (1840g) Body; Length: 18" (457mm) Width: 8.5" (216mm) Height: 5.4" (137mm)

product_scx10rtr_950x450.jpg (950×450)


The SCX10™ was designed to resemble its full sized "scale/1:1" counterparts, yet is still able to perform like the 2.2 AX10 Scorpion™. Unlike the AX10™ which is
purely competition driven, the SCX10™ doesn't compromise its look for pure performance although the SCX10™ is a more than capable rig, on or off the trail.
The SCX10™ uses the same ultra durable transmission and axles as the AX10 Scorpion, but is built around a more realistic or "scale" frame. It also 
runs smaller, more realistic looking wheels and tires. These trucks are designed to have fun with especially if you have a few friends that have scale rigs. 
Getting a few guys together and going out for a scale trail run is one of the best things you can do if you're an avid off-roading enthusiast.
The axles have been designed with many features that are not available from other products on the market. Everything from the axle strength, 
pinion angle, caster, and ground clearance were taken into consideration when designing these axles. The result is a far superior axle that
will stand up to some severe punishment. To ensure added longevity from the start a hi-tolerance sintered diff locker is included along with hardened axle shafts.

Heavy Duty Differential Locker
Made from strong sintered metal. Sintered metal provides superior metallurgical characteristics and can be manufactured with very tight tolerances. 
Adds weight where it is needed in the axle. Simple one piece design. Reduces slop in drivetrain by eliminating cross pin.

WB8 Drive Shafts
The WB8 Wild Boar™ driveshafts are a constant velocity joint design [CVJ] which allows for efficient, friction free movement. Full metal-to-metal
construction for the CVJ housing makes them durable.They're also easy to assemble and maintain!
NOTE: driveshafts shown with optional ax30786 (not included)
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. It also helps with steep 
off-camber climbs by having the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.

27T Motor
The Axial 27T motor supplies plenty of power for high speed trail runs or powering over obstacles.

Spur gear cover
The protective transmission spur gear cover helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drivetrain.
The transmission was designed to place the weight of the motor as low as possible to maintain a low CG (Center of Gravity). The ultra compact transmission 
doesn't compromise performance because it also allows for a wide range of gearing choices. The overall ratio can be adjusted from 15:1 all the
way up to 74:1 using different pinion/spur gear choices which allow for super high speed or to competition level crawling speed.
The slipper clutch allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.

1.9 Walker Evans Wheels
Officially licensed Walker Evans Racing wheels are molded from a blend of high quality nylon materials for strength and durability with a solid 12mm hex mount 
and dressed in black and chrome for eye catching looks.

1.9 Ripsaw R35 Tires
The 1.9 Ripsaw™ tires are mounted and glued to Walker Evans Racing wheels right from the factory. The Ripsaw™ tire offers a realistic and aggressive tread 
design for the ultimate scale appearance and they're molded in our high performance R35 compound for maximum grip.
The shocks on the SCX10™ feature dual rate springs which help deliver maximum off-road performance. They are oil filled shocks which allow 
you to tune the dampening rate. Shock hoops on the SCX10™ frame allow for multiple shock positions for tunable performance. 
There's also coilover shock reservoirs for realistic scale looks.
The Simple LED Controller connects to the receiver and is turned on/off with the main power switch of the truck. 
There are two white LED's for the front and two red LED's for the rear. Additional light buckets are also included for custom looks.

2.4ghz Radio For Worry Free Driving
The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim 
dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low.
The AR-3 2.4 GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts. This lightweight, compact, and 
bind button equipped receiver with LED indicator makes setup easy!

AE-2 Speed Control With Drag Brakes
The Axial AE-2 ESC was developed in partnership with Castle Creations and features LiPo cutoff, drag brake for tough crawling situations, a 
Tamiya style plug connector and is programmable via Castle Link™ (Castle Link™ not included).

This product is NOT Eligable for free shipping if sold less than MAP price.1217

Add to Cart:

  • Model: ax90022
  • Shipping Weight: 13lbs
  • Manufactured by: Axial Racing