Ax90017 Axial XR10 , (Kit A) Needs Assembly
This kit contains everything you need for an axial XR10 ready to run.
KIT A
(1) axial XR10 crawler kit. ax900017
(1) Futaba 2-ch am radio with servos.
(1) Castle Sidewinder Speed Control.
(2ft) Deans 12 guage black and red wire
(1) CKRC 7.4v, 1300 mah lipo.
(2) Deans Male battery connectors
(1) Much More Racing Lipocket charger.
(2) Integy 45t or 55t Pro motor
(4) Hot bodies rover tires (white)
Save $$$ with this package deal.
CKRC will allow you to mix and match. If you would like to upgrade any of
the parts in this package, send us a pm, and we will quote you a new package
from any of the parts on our site.
NOTE: Assembly and soldering is required.
This is the electric powered, radio controlled
XR10 Motor-on-Axle Competition Rock Crawler from Axial.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Chassis: Aluminum plates with composite plastic skid plate, chassis
has multiple upper link adjustment holes for suspension tuning and
anti-squat adjustments, removable electronics tray and multiple
ESC mounting plates
Drive: Four wheel with oversize 12.5mm steel universals, plastic
lightweight axles with 16mm narrower rear axle to squeeze through
tight gate layouts, low profile axle housing for maximum ground
clearance
Ball Bearings: Full set
Pinion Gear: 14 tooth, 12-19 tooth pinion gears can be used for gear
ratios from 44.2:1 through 27.9:1
Differentials: Locked (spool)
Body: Axial Hardline, meets all U.S.R.C.C.A. requirements, adjustable
body mounts for different body angles and heights
Wheels: Axial 2.2 competition beadlocks with narrow offset for
greater steering response, also includes CNC orange anodized rings
Steering: Behind the Axle (BTA) design, enclosed steering slide
with 8° kingpin angle for decreased scrub radius and tighter turns,
front steering axle can rotate the motor up or down
Suspension: 4-link double triangulated with composite plastic upper
links and oversize rod ends with 7mm aluminum links and replaceable
composite plastic sleeves
Shocks: 72-103mm aluminum bodies, 10mm Delrin pistons with adjustable
upper mounts for fine tuning ride height
Caster: Adjustable in 15° increments, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
INCLUDES: XR10 Competition Rock Crawler with wheels, beadlocks, body and
instruction manual
REQUIRES: Radio: 2-4 channel with one servo for steering
Motors: Two 540 size
Tires: 2.2" crawler type with foam inserts such as the Pro-Line
Chisel, PROC4914
Battery: Compact LiPo or LiFe 2/3A
Battery Charger: For selected battery type
Building and track equipment
SPECS: Vehicle,
Length:
Width: Front wheel to wheel outside: 10.2" (260mm)
Rear wheel to wheel outside: 9.5" (241mm)
Wheelbase: 12.5" (317.5mm) max
Height: 5.25 - 6.75" (133 - 172mm)
Ground Clearance: 1.75 - 3.40" (44.5 - 86.5mm)
Gear Ratio: 37.9:1 with included 14T pinion
Body,
Length: 12.75" (324mm)
Width: 5.25" (134mm)
Height: 3.5" (89mm)
