Your cart is empty

Ax90018 Axial Wraith Rock Racer Buggy RTR

$409.99 MAP, add to cart for lower price

Ax90018 Axial Wraith Rock Racer Buggy RTR. 



 This is the radio controlled, electric powered, ready to run, 1/10 scale
                         Wraith Rock Racer from Axial.

FEATURES: Chassis: Full tube composite construction with composite skidplate Drive: Four wheel shaft with splined plastic slider and screw shaft for a more positive lock to the output shaft Radio: AX-3 2.4GHz 2-channel with throttle and steering reverse and trim, AS-3 130oz-in metal gear steering servo and waterproof receiver box Motor: 20T ESC: AE-2 forward and reverse with drag brake Transmission: Steel output gears and slipper clutch equipped, upgradable for three function Dig feature Differentials: Locked type with easy access for rebuilding and maintenance Suspension: Four link Shocks: Oil-filed with silicone diaphragms and bushings and 3.5mm titanium nitride coated shafts Cockpit: Console and gauge detail with licensed Corbeau LG1 race seats Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo pack up to 1.8" (47mm) wide, 5.9" (150mm) long, 1.1" (28mm) high Tires: 2.2" Ripsaw Wheels: 8-spoke 2.2" Rebel black and chrome, 12mm hex mount Lights: Four front and two rear with 14 included light buckets that hold 3mm and 5mm lights (LEDs not included)

INCLUDES: Assembled Wraith Rock Racer with 2.4GHz Radio, 20T motor, cockpit six LED Lights and Instruction Manual

REQUIRES: Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack Battery Charger: For selected battery type AA Batteries: Four for transmitter

SPECS: Wheelbase: 13.5" (343mm) Width: 11.6" (295.3mm) Height: 9" (228.6mm) Ground Clearance: 3" (76.2mm) Weight: 5.5lbs (249kg)








ALLERY

All Hex Hardware

AXIAL AR60 OCP-AXLE™ (OFF CENTER PUMPKIN DESIGN)
High Performance Competition Shocks4-Link Suspension
True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle™ tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.

High Performance Competition Shocks
DIG CAPABLE TRANSMISSION
The Wraith™ transmission is easily upgradable for Dig (patent pending) function which, when installed, gives you a three function transmission. The transmission also includes all steel outputs.
Full Tube Frame Chassis
AX30793 DIG UPGRADE SET
The optional Dig Upgrade Set for the Wraith™ comes with servo linkage, slider parts and a new output shaft. When installed you have 4x4, 4x2 (freewheel) and Dig (rear locked). This aids in extreme climbs and descents and turning a tight radius. (not included - extra servo and three channel radio system also required).
Easy Diff Access
SPUR GEAR COVER
The protective transmission spur gear cover helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drivetrain.
Slipper Clutch
SLIPPER CLUTCH
Allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.
High Performance Competition Shocks
HIGH PERFORMANCE SHOCKS
Axial competition style shocks feature threaded shock bodies for tuning and easy pre-load adjustment, 3.5mm titanium nitride coated shock shafts for reduced lateral movement, silicone diaphragms for a more consistent feel and silicone bushings to prevent binding.
Easy Diff Access
EASY DIFF ACCESS
A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws to gain access for rebuilding and performance tuning as well.
4-Link Suspension
4-LINK SUSPENSION
The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.
Optimized Steering Geometry
OPTIMIZED STEERING GEOMETRY
The front axle steering geometry is engineered for high speed performance with close attention to maximum pivot angle, minimal scrub, adjustable castor and Ackerman set as close to 0-degrees as possible. This geometry theory achieves a desired tight turning radius with locked differentials and better steering control at high speeds.

WB8 SPLINED DRIVESHAFT
Metal to metal universal joint driveshaft system with splined plastic slider. This design provides more durability than traditional driveshaft designs because it uses a screw shaft for a more positive lock to the output shaft.
Full Tube Frame Chassis
FULL TUBE FRAME CHASSIS
The most realistic high strength composite tube frame chassis on the market. Our high strength composite plastic is impact resistant to help protect the Wraith™ from crash damage.
All Hex Hardware
ALL HEX HARDWARE
Completely assembled with all hex hardware. No Philips screwdrivers required!

SIMPLE LED CONTROLLER
Six LED lights are included: 4 white LED lights for the front and two red LED lights for the rear. We also include the added bonus of 14 included light buckets! (7 different styles. LED’S not included). Light buckets hold 5mm and 3mm lights and come with realistic plastic lenses.
Battery Tray for Standard Stick Pack and LiPo Packs. Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size.
BATTERY TRAY
Battery tray for Standard Stick Pack and LiPo Packs
Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size. No disassembly or tools needed to remove and replace the battery.
Conveniently Located Power Switch
CONVENIENT SWITCH
The power switch is conveniently located under the dash.

CORBEAU® LG1 RACE SEATS
Fully licensed Corbeau® LG1 race seats add to the scale realism of the already highly detailed interior set.

DURABLE SKIDPLATE
The skidplate protects the transmission and other critical components while providing a flat surface to help the Wraith™ slide over rocks or other obstacles.

2.2 RIPSAW™ TIRES
Ripsaw™ tires are mounted and pre-glued to 8-spoke Rebel™ Wheels right from the factory. The Axial 2.2 Ripsaw™ tire offers both a realistic and aggressive tread design for the ultimate scale appearance and performance.

2.2 REBEL™ WHEELS
Pre-mounted 2.2 Rebel™ Wheels with 12mm hex mount which is reinforced with additional material and ribbing. Finished in a two-tone Black/Chrome scheme for great looks.

**************This product is NOT eligible for fre shipping. ***********

Add to Cart:

  • Model: ax90018
  • Shipping Weight: 13.5lbs
  • Manufactured by: Axial Racing